- 10 x On-Off ventilation Steps with Winter-Summer ventilation mode
- 0-10V ventilation by inverter
- 2 x flaps (air inlets) working either by static pressure or Associative or Proportional or Natural mode
- 3 Heaters
- 1 Cooling
1 Silo with load cells or without load cells (volumetric system)
1 Birds weigher
Lights (either working in on-off mode or by 0-10V regulation)
Feeding are available up to: 8 inputs, 6 on-off outputs and 1 0-10V outputs.
Up to 10 x independent and fully configurable ventilation steps according to following typical options:
- On / Off
- Fan speed control by transformer
- Proportional by 0 -10 V for triac / inverter speed control
- Or a combinations of the three systems above
Up to 2 independent flaps (air inlets) working either by static pressure by Depressiometer or Associative or Proportional or Natural mode (by 0-10V or by feedback potentiometer).
Up to 3 ON-OFF or 0-10V heaters with indipendent temperature probe.
Controls of cooling system by temperature and % RH.
Humidification according to temperature and % RH.
These probes, alongwith the heating and the flaps probes can be connected to create an “average” temperature value as a mix of the temperatures as recorded by the above probes.
The %RH probe affects Ventilation, Cooling and Humidification systems.
CO2 and NH3 probes affects Ventilation systems.
Heating and ventilation options can be set to run automatically according to the day of the batch.
In the Archive are recorded daily values of internal and external temperature, daily working time of heaters, total working times from cycle start-up.
Temperature, humidity, air-pressure,C02-NH3, recording all the alarm events (including alarm exclusions).
Feed management can be done either by the silos load cells, or by volumetric system (when silos have no load cells) by converting the auger working time into Kg, or by an external weighing system (i.e. a mechanical weigher).
Water distribution is programmable at preset times and consumption is recorded by the water meter. Water level is kept under constant control to prevent problems.
Lights can control by On/off output and with dawn/sunset 0-10V output.
Detection and recording of feed consumption done by load cells.
Automatic detection of silo uploading.
Daily and total cycle data are all stored into the Archive.
The "networking" is meant the ability to operate on the Farm in Xfarm remotely with using a personal computer on which you installed our software Xfarm Net PRO
The maximum distance between the personal computer and the Last of the Farm related Xfarm is 1000 meters (1km).
Network software Xfarm Net
Data transfer (USB)
The main programming parameters, the archive downloads and software updates can be made by PC connection via the USB pen drive.
With this program you can display on your personal computer all data cycle downloaded via the USB stick.